Keeping your heating and cooling systems in good working order means your utility bills will be lower, your home will be more comfortable, and you’ll need to call for repairs less often.
Schedule a maintenance service call before the heating season starts. If there are any problems with your system, it’s better to find out before it’s freezing outside! Do the same for your cooling system before sweltering season begins.
Replace your heating and cooling air filters every month that they’re in use. Operating your system with old, dirty filters means energy is wasted and your system may even be damaged. While you’re at it, check and clean the filters in your home’s air cleaners and humidifiers. Regular filter replacement, or cleaning of electronic air cleaner cells assures the best possible results for safe, reliable and efficient operation of your system.
If you have a forced air heating system, check your furnace’s blower compartment and blower coils. Vacuum them if you see dirt and dust there. You should also check fan belt tension, and lubricate fan and motor bearings.
- If you have a steam system, check the shut-off valve for leaks.
- Bleed hot water system radiators at least once a year.
- Don’t keep clutter near your furnace. It’s a fire hazard, and may keep your system from operating efficiently.
- To make sure you’re getting the most out of your heating system, keep the heating registers and vents throughout the house free of dust, dirt, and pet hair by vacuuming them at least once a year.
- Listen for odd sounds when your heating or cooling system kicks in. If you hear anything unusual, get in touch with your service professional so you can head off problems before they become serious.
- In winter months, set your ceiling fan at its slowest speed and reverse it in order to gently push warm air down from the ceiling without generating a breeze.
- Keep the area around your heating unit and hot water tank free of combustible materials, papers, cardboard boxes, etc.
- Be familiar with the need for adequate combustion air for your unit.
- Avoid storing or using paint, thinners, cleaning agents, or refinishing products in unventilated locations around your equipment.